Quote:
Originally Posted by williamprunty
Anyone have a clue? 2022 Thor Magnitude RB34
I have no power to camera or jacks and the slide is in the locked position. I’m thinking it’s tied into the ignition safety feature and it’s not recognizing the ignition is in the on position.
Stuck at Blue Dog Rv.
|
Not sure what you mean by "slide is in the locked position" but I'll assume it's either in or out and you can't move it - Could be an ignition interlock or no DC power to the slide controller.
The jacks require main power through the 100 amp DC breaker as well as "AUX" power from the ignition interlock. The generator starts/runs so we know the 100 amp DC breaker is good and the house batteries are good.
By "camera" I assume you mean the entertainment device which also displays the cameras. It requires power from the house batteries through the battery disconnect battery relay or the converter from SP. Since you've verified the USE/STORE switch is in use and/or the other DC loads work than that power source should not be suspect. But it also requires power from the chassis battery (as do the other items through the ignition interlock).
So the common symptom looks like a loss of chassis DC power which Jimbo alluded to asking about a breaker near the chassis battery. There generally is a DC breaker under the hood that supplies all chassis DC loads that Thor installed through a Thor installed fuse panel. That breaker may or may not be near the chassis battery but it's definitely under the hood. I'd be tracing that down.