Quote:
Originally Posted by Skywrench
I like these Facon lights a lot. They work well, have metal housings and the screw holes are the same as the originals. You can install them without the screws, they have spring clips that hold the lights to the ceiling. I prefer to remove these clips and mount them with the original screws because the spring clips are so strong that getting a light back out with those clips on there is difficult. Just use a pair of pliers to rip the clips off. These lights will work great for all of your ceiling lights but the housing is too deep to be mounted under the cabinets or in the slide out ceilings.
https://www.amazon.com/gp/aw/d/B06XR...b_b_asin_title
These Kicored lights are thin profile and will work for under cabinet and slide out ceilings. Also have metal housings. The build quality isn’t as good as the Facon but so far I haven’t had any of these fail and they are usually cheaper.
https://www.amazon.com/gp/aw/d/B07TN...b_b_asin_title
I’m also going to check out the M4 light mentioned above.
|
What temperature did you order?
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3
2020 F-450
|