Quote:
|
Originally Posted by penguin
Hey Jamie. The scissor jacks I bought have a 7 1/4" mounting width. I went to my local steel supplier and asked for them to cut me 2-7 1/4" square plates to mount the jacks to. I drilled and tapped 2 holes to mount the plates to the frame and 2 holes to mount the jacks to the plate. That way you can mount the plates and jacks where ever you please. I can take more pictures if you need them. Hope this helps.
|
I had noticed that in your pictures: The extra plate. I would probably be able to handle that install but where I want to put them they will have to be about 2" to 3" lower than the frame so that you can use the crank handle below the skirting and one side will also have to clear the exhaust pipe.
Where I want to put them it may make sense to actually make a new cross member and mount them to that... which is a bit more work
Thor Forums
