Morning,
x2 on what Ed_Helen said. Level 1st then put the slide out.
Had the same problem with the controller (water fried it) on the way home from picking it up!! Moved the replacement to the inner wall of the bin away from the cable hole into the wheel well.
Put a catch on the sliding pantry door before it smashes into the opposite cupboard...
Get it aligned straight away and check tire pressures. Then look into the CHF front and rear.
Check out the threads about the tail lights leaking (before the rear wall turns to mush from water ingress, I removed the lenses, throw away the useless foam gasket, seal the black plastic bulb holder to the the body using silicon then reattach the lens cover.
With the power OFF. Check that the cable connections in the black box (Transfer switch) under the seat are very tight and well insulated from each other (behind the converter area), there has been a spate of electrical fires due to loose wires).
Quickly check that the nuts holding on the wiper blade arms are tight, if loose they can round off the splined shafts.
Sorry didn't mean to make a lists... just a few thoughts.
Have a great time, love ours... but she is a high maintenance girl
Rgds
Tex.
__________________
|