Assuming a good battery (since you just replaced it)...
First stop is a fuse right near the battery... As mentioned there should be a 'flag' indicating if it is tripped - but a quick check of voltage will verify.
Next stop would be the 'use/store' switch. You should hear a relay when activating/deactivating the switch... Don't have the same rig - so not sure where the actual relay would be on yours.
Third would be the 12v fuse panel... In my case under the bed. See if it has 12v coming into it...
Those would be the three primary areas that would result in no power anywhere while not plugged in.
I would also assume all is working if you plug into shore power? Typically will bypass all of the above using the converter powered by 110 to generate 12v.
__________________
Greg
Not yet retired...
Florida (Michigan transplant)
2014 Hurricane 32A
2000 Infinity (previous)
|