No,unfortunately I don't. But easy to find: trace the major wiring harness from the rear of the coach along the left (drivers side) frame rail. It is of course under the coach, just to the left of the powertrain - before the harness goes up under the hood. I tied into the harness rearward of the connector where there was good access.
I mounted the controller to the right of the steering column, took the power feed from the fuse block underhood on the drivers side, and the signal from the stoplight switch. All wires go thru the passthru on the driver side.
I have installed a lot of brake controllers thru the years before trucks were wired for them ( race trailer) , not really that hard - but hated to go back ! Like I said- most time was spent researching and tracing wiring - should have just dived in and wired it from scratch ! Not a lot of info on stripped Van chassis on the Internet....😡
__________________
|