Decided to clean up the center console after a few trips out in our 2015 24.1.
1. Cleaned up the iPhone connections to remove the bundle of external wiring required to link to the radio. This involved removing the front panel remote mounts and bringing the single lighting cord up through a new hole. I trimmed out the new hole with a desk grommet.
2. Replaced both 12v sockets with dual USB charge ports. Just opened up the existing holes with a dremmel and then it was plug and play.
3. Hard-wired in the inverter and mounted the remote power switch in the hole left by removing the HDMI panel. Just had to file the hole to fit.
Thor Forums
