I was a bit surprised in my coach that solid wire was used. I cannot think this is a good idea. Like a boat, stranded wire should always be used in a high-vibration area.
But since the coach already uses solid wiring, then I suppose the point is moot.
One thing you will find though is the use of "Speed Box" receptacles, which is a tool-less snap-together assembly. These boxes use insulation displacement connections and you will wish to replace the entire receptacle and a new box (the Speed Box electrical boxes are integrated into the receptacle), and do it right.
Otherwise, you will have a difficult time in adding a circuit to the existing end-of-the-line receptacle.
__________________
The only thing that works on a RV is the owner...
|