Quote:
Originally Posted by DinoC41
It is a black and gray tank waste removal system that uses the "cam" instead of the traditional twist on hose fixture...hope it works since our "wet bay" is small and the connection could be a little tricky!!
Dino sends
|
Dino,
You do know the sewer connection valve on the mh swivels up and down. Remove the round access plate below the valve, swivel the black/gray valve down then hook up the hose through the access hole.
I keep two 10' hoses, one 5' hose (I use for my tote tank), and two 90* elbows plus the sewer hose support (similar to this
https://www.amazon.com/Level-Trek-LT...+hose+supports ) in the sewer compartment. Its small but everything fits just fine.
Jerry