|
I changed out the round knob for a crank. I cut about a 1 1/2 inch notch in 3/4 inch pvc that just fits on the crank, on the other end I put #10 screw thru a cap with an acorn nut on to, glued that on the pipe. Pipe is about 18" long, I glued a rubber cap from an old vacuum line on the acorn nut. Now my wife can use the notched end to open vent and other end to operate switch. Works good and she likes it! Had scraps in the garage to build it. Says she can also use it to whack me if I act up???
__________________
|
Thor Forums
