The WFCO is not capable of charging the Exides properly as I have never seen one go above 14.2 volts. If you check the manufacture web site the Exides require 14.8 volts for up to 12 hours to complete charging in absorb mode. The absorb voltage for the WFCO is 13.6 volts which is the float level voltage for the Exides.
When on shore power I use an automotive smart charger that will reach the required voltages.
__________________
2016 Axis 24.1 E-450 6 spd tranny
300 watts portable solar.
200 watts solar on the roof.
Wrangler JK dinghy
|