Quote:
Originally Posted by petew
Just spent some time under the front seats of my Vegas and found that the seats are held to the swivel mounts with 4 5/16" studs .
I took the nuts off ( 1/2" socket) and placed .300 spacers that I happened to have under the front two seat studs on each seat. The same could be accomplished by stacking washers.
It seems that .300 (a little more than 1/4") is all you can squeeze in there or else there won't be enough threads on the stud for the nut to grab.
That got rid of the bad angle on my seats and did not effect the swivel function at all .
|
Picked up the Vegas from storage on Sunday. First project was to get back to the seat. I took petew's advice and raised the front with 3 washers on each side. The seat already feels better. We will be taking a trip the next few weekends and I will report back. Here are some pictures of the mod. Thanks again
Thor Forums
