Thor Forums

[Shawn62]

Kent,

I should have taken a "before" photo. I had a 20 Ton hydraulic jack and a tool bag filled with wrenches, pliers,hammers, screwdrivers etc. The rear half of the compartment bottom had no screws to fasten it. The bottom sagged and pulled away from the wall and foam weather stripping. The gap was large enough to show daylight. I did not lose any tools. I unloaded the compartment and it was a bear getting the weather stripping back in place. I used #8 by 1 inch self drilling screws to secure the bottoms. Thor uses square drive screws with black colored heads. They are difficult to see or photograph. Best to locate them by feel. I carry lots of tools and heavy items. I need those compartments to have strong floors.