Quote:
Originally Posted by Ace30.2
Well just got back from my first trip so I opened the access spot I made and noticed another big pile of stuff right at the bottom of the drop point. Used a lot of water flushing. Looking in there you would need to fill your black tank at least 3/4 full for it to make a difference (bad design of tank). So it seems I'm going to have to get the hose out and spray down the big pile of stuff. Again we used A LOT of water every time we flushed.
|
Drilling the access hole and installing the plug was a great idea to allow you to apply water pressure from the hose right to the problem for the fix. Now go the extra step. Remove the plug and install a hose connection with a short pvc 1/2" nozzle on the inside pointing at your problem area. Then next flush just attach your water hose from the outside. Just an idea.