Quote:
Originally Posted by Tfryman
I've been watching with interest the posts about adding the additional monitor but there are some points either I have missed or are not clear to me in my situation:
Are you replacing the Thor provided, triggered switch box with the monitor, or leaving it in place and routing the output RCA to the monitor?
If replacing the box, how are the 3 cameras attached to the monitor? For that matter, how are they attached to your Silver switch box? I have the black switch box and the camera leads have a proprietary multi-pin connection, not a standard RCA.
And exactly which monitor have you been using. I see they have several
I thank you for the clarification although my DW may not.
|
The monitor comes with a wire harness. Harness camera wiring is the same 5 pin connector as the cameras. Just plug in. Same with the power, ground, and trigger wires. Just use butt connecters. You might need a volt meter to determine which wire controls what. It will depend on which wire harness thor used. My stock splitter is out of the mh. Once the monitor is in the splitter is no longer needed. If you have more wuestions just ask.
Jerry