OK so your does not have the safety pins the newer units have.
take a look (while bed is in the Up position and see if there is a
hole where a safety pin could be placed?
If no hole (this would be just below the bed on the outer lift arms)
see if you could drill a hole in each side through both inner and
outer lift arms so you could install said pin. The pin is metal and
about 1/8" diameter.
If you are uncomfortable doing this then go to your dealer or repair
shop and talk with them about doing the job.
__________________
Phil Saran
2019 Cougar 30 RLS 2012 Ram 3500 4x4
Colorado
I like to wander and I'm not lost!
|