Do the other slides work??
Any flashing codes on the controller?
Verify you have 12v power at the controller... No power here and motors won't move (or hold bed/slide in place)
Verify you have 12v power on the center pin of the extend/retract switch... No power here and it can't send the extend/retract signal to the controller. Check the key switch (disconnects that power) or bypass jumping a nearby 12v source to center pin of extend/retract.
No way to drive my Hurricane with bed down... windshield completely covered by the platform and cabinets that lower with it.
__________________
Greg
Not yet retired...
Florida (Michigan transplant)
2014 Hurricane 32A
2000 Infinity (previous)
|