Check your inverter manual and determine when the inverter goes into the low battery power mode and shuts down. Set the AGS to slightly higher than that level. On the Xantrex 1800 the low voltage alarm sounds at 11 VDC and the low voltage alarm cutoff is 10.5 VDC. Setting the AGS to start between 11.5 and 12 VDC should keep you in operation.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
|