Thor Forums

[EA37TS]

Originally Posted by WarEagleDan

I unplugged the shore power and tried the Auto Gen Start TEST switch - it worked as advertised. I set the low voltage to about 11.8v and the runtime for an hour. 8.5 hours later the generator started just like it was supposed to. However, I noticed that the highest charge to the batteries was 11.98 volts and that the microwave and AC did not work. After an hour it turned off just like it was supposed to. I waited about 10 minutes and cranked the generator up - still no power to microwave and AC. I turned off the generator and plugged in to shore power and every seems fine. Anyone have any idea what's going on?
Thanx,
Dan

When you were running the generator did you try turning off the inverter and then running the AC and Micro. Possibly the inverter circuit is overriding power to the other circuits when the inverter is on.