$1.00 Wiper Mod.
I did notice the factory nuts were prone to loosen up due to the cone shaped wiper shaft. I did replace the two nuts (see photos) with Nylon Insert Nuts. Have had no issues. This is the first thing I check flip the cover and make sure they are snug. ***If mine were to strip out. I think I would reset the wiper arm with a sm amount off JB Weld just to hold in place then drill an 1/8" hole thru the wiper and stripped shaft then insert cotter pin. Terrible design....
__________________
Rev. Jeffrey 2017 Thor Axis 24.1 E450 Windjammer.
Silver Safe-T-Plus Steering Control
SSF-106-40 SumoSprings Solo Front Bump Stop SSR-107-47 SumoSprings Rear Bump Stop
Hellwig 7718 Front Sway Bar & 7180 Rear Sway Bar
Koni FSD Front Shocks 8805-1042 / Koni FSD Rear Shocks 8805-1043
|