Quote:
Originally Posted by rmblaster
oldgold
i have read your installation of monitor and I have some questions on the trigger wires you say to cut the 3 wires and hook them up to new monitor harness and that would be the wires coming from the connector and not the video switch correct and another question there is a 12v hot wire and ground at that connector they just stay hooked to old video switch ? is there any reason the 12v wire cant be used to power the monitor its only hot with the key on
Richard
|
Richard,
I know this is old and hopefully you saw my post on the other thread.
What you suggested is what I ended up doing with my install. I used the power and ground from the switch to power the monitor. In fact after installing the monitor I removed the switch completely. Works better this way. On and off with the ignition.
Jerry
Thor Forums
