|
Slide problem fixed. Talked to a Thor tech who had me check a couple of things then authorized the mobile tech. The MT found a motor unplugged because the cable is not secured preventing movement. Also found the bulb seal which normally serves as the wire chase is missing. The MT. secured the wire with tape to prevent movement until the bulb seal can be installed.
FYI, I talked to 3 Thor techs of which 2 suffer from the ID 10 T error. Thor is running on 33% right now.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
|
Thor Forums
