Quote:
Originally Posted by Firehawk
Greg,
Checked the Use/Store switch and it was in the Use position. I measured for 12 volts on the control board and while the generator is not running and the Use switch in Use position there is no 12 volts. When the generator is running there is 12 volts going to the control board. Going to go back to the converter to see if 12 volts is missing when the Use/Store switch is in the Use position.
|
The control board doesn't have separate connections for 12v from converter (when genny is running) and 12v from battery (when genny is off)... It wouldn't know the difference in sources for power...
Is everything else 12v working when the genny is off and not on shore power?