Quote:
Originally Posted by srolfe
Replaced starter battery.
1. Removed deck area on dash.
2. Plywood under dash had been cut and sealed with silicone and aluminum tape
3. Cut through tape and silicone and pulled plywood panel out.
4. Removed battery, was a bit of a hassle.
5. replaced battery.
Will add some thin tabs to the piece of plywood removed and then put some backer rod in gap and reseal and retape.
|
Nice job, shame you had to do it that way though.
__________________
2015 Thor A.C.E. 29.3
2014 Honda CRV Toad
Ohio FMCA 317123
Camping World Indianapolis, worst dealer EVER experienced
|