Quote:
Originally Posted by DenverTransplant
One other issue is that occurs with both slides is that if the slide has been closed for some time, pressing the open switch won't work until I press the close switch. When I push the close switch, the slide will move in another 1/4 to 1/2 inch. Then the slides will open. When closing the slide we always hold the switch down for 10-15 seconds in order to synch the motors. Its acting like it thinks the slide isn't closed all the way. Comments?
|
Mine does the same. I notice it when the power is off at the use/store switch for a while. When placed in the Use position the slide won't activate until I press the switch to the retract position. The slide doesn't move in at all but then works perfectly when extending. It does not fail to extend without first pressing the retract switch when traveling and the Store/Use switch remains in the Use position. Yes, I too always hold the switch to a count of 5 Mississippi with a southern drawl, so its probably closer to 10 Mississippi really. I suspect the poor controller gets its brain scrambled with the power on and off. Maybe, maybe not, but it works fine after first going to retract position. It's happy, I'm happy.