radio
I took the radio out and also the side air vent for access to the nuts that held it in. Then drilled a net hole in the dash top to allow it to be tilted out on the passenger side . 3 inches is the limit that it can be tilted. Once the hole is drilled on the top of the dash (not in the bezel ) it can be put back in the original holes on the drivers side. I used some plumbers tape to make the side brackets then cut a piece of 1/8 th plywood for the filled and use screws to hold it on. You can paint the wood or put any finish on it.
I'll look for more pictures as I have a bunch.
Hope this helps
__________________
Alan
US Navy E5
Vietnam Vet
Retired mechanic
|