Thor Forums

[rynosback]

I was going to buy a Kobalt 1.5-HP 3-Gallon 155-PSI 120-Volt Hot Dog Electric Air Compressor http://www.lowes.com/pd_57655-30449-0200382_0__?productId=4686711&Ntt=air+compressor&p l=1¤tURL=%3FNtt%3Dair%2Bcompressor&facetInfo=

Or
a PORTER-CABLE 0.8-HP 6-Gallon 150-PSI 120-Volt Pancake Electric Air Compressor http://www.lowes.com/pd_349204-70-C2002_0__?productId=4764588&Ntt=air+compressor&pl= 1¤tURL=%3FNtt%3Dair%2Bcompressor&facetInfo=

as I think i read where our trailer tires are speced at 125 PSI cold. So I wanted to make sure that I could meet those needs. Then I started looking the that amps that they draw....... I only have a 1000 watt inverter so it does not look like I will have enough power from the inverter to tun it.

So then I found this compressor VIAIR 150 PSI High-Flow Air Source Kit
http://www.amazon.com/viair-150-psi-...SIN=B000X9LTXA
It is more expensive then the others. But it looks like I can run it on the road side if needed. I would even like to run my air gun for short bursts to remove tires if needed.

Am I right in my calculations? What are you running?

Thanks