GLM1000

I have an AAV for each sink (I have 3). All of them are working. According to the plumbing schematic from Thor the grey water tank does...

I have a 2016 Thor Venetian with Lippert windows. I have already had 3 vent windows fall off while driving down the road! There has been...

Disregard my last post. Sorry. The shower drain does have a goose neck but I do not see the vent line. It must go through the roof...

I pulled the furnace duct and can see under the shower base. No vent of any kind that I see.

The drain is permanently fixed to the shower base. How do I get to the vent check valve?

I found the “check valve” vent cap for the sink in the room with the shower but it works fine. Does the shower have its own check valve...

I have a 2016 Thor Venetian M37. The shower is not draining. The grey water tank was half full so I drained the tank and the water...

I found it when I was checking for voltage across all of the breakers. The bad breaker would “crackle” where it was connected to the...

Found the problem - breaker to inverter/charger was burnt out and erratic. Replaced the breaker and everything works! Thanks for all the...

1. Amps per line is 0 because with SP or Generator on nothing works. Monitor does show 120v per line but 0 amps per line. 2. House...

Everything in the ATC and breaker panel checks good. Voltage across all breakers is 120v. I don’t know what else to check.

I have power to the breaker panel. However, if I turn OFF the main breaker in the panel the voltage at the monitor goes to 0v. Looks...

So now I have no power in the MH whether plugged in to shore power or with generator running. Monitor is showing 124v on each leg on...

I checked the source and it’s a steady 121V. It’s something associated with the MH - possibly a lose or bad connection somewhere.