2010 Crossroads Cruiser 30SK

[m197791]

Hello, I am new to the 5th wheel world of RVing. I just purchased a 2010 Crossroads Cruiser 30SK about a month ago and I am chomping at the bit to hit the road. I have a 2000 Chevy Silverado K3500 with a 6.5L Turbo Diesel with many mods and upgrades. I need some help though my RV did not come with a shore power cable or the RV to tow vehicle power cable and there is no reference to what I need in the owner's manual. I contacted Crossroads manufacturing who are investigating what I need but it has been 2 weeks and all I have heard is crickets that they are still looking. So does anyone have a 2010 Crossroads Cruiser 30SK that can tell me what and where I can purchase the appropriate shore power cable and RV to tow vehicle power cable...

Thanks

 

[Papa-T-XRD]

So I'm not sure which shore cord you need. Is it 50 or 30 amp. Do you have the locking connection on the driver side near the rear that plugs in?? You should be able to go to a camping world or RV parts store and purchase the shore cord and the umbilical cord that goes to the vehicle. My question is why were they missing? If the shore cord plugs in at the rear I could understand that the previous owner wanted to keep it but don't understand why the umbilical cord is missing. Did you purchase from an individual or a dealer?

 

[Buggstzer]

I have a 07 30SK

I have a 2007 Cruiser 30SK. I would be surprised if the 2010 is that much different.

My "shore" power cord in located in the small (6" square ???) door that is located just behind the basement storage door on the driver side. It is permanently attached and can fall down inside the door cavity. You may have to reach pretty far down if it fell all the way to the floor.

I store my plug that runs from the trailer to the truck up inside the back of the pinbox. I also shove the break-a-way cable up there too.

Hopefully you can look around and find both.

 

[Papa-T-XRD]

I have a 2007 Cruiser 30SK. I would be surprised if the 2010 is that much different.

My "shore" power cord in located in the small (6" square ???) door that is located just behind the basement storage door on the driver side. It is permanently attached and can fall down inside the door cavity. You may have to reach pretty far down if it fell all the way to the floor.

I store my plug that runs from the trailer to the truck up inside the back of the pinbox. I also shove the break-a-way cable up there too.

Hopefully you can look around and find both.

Very true. That would make sense. Let us know. Also m19779 welcome to the forum.

 

[DavisK]

Welcome to the forum!