On our new 2023 Vegas 24.1, the Irvine Shade and Door windshield shade was not responding at all to the programming switch. After lots of failed fiddling and reading through various versions of the programming instructions online, I decided to check out the programming switch wiring.
It seems the tiny spade connections on the momentary programming switch lugs were either loose or off completely. I cut away the heat shrink tubing that covers the wiring into the switch and recrimped and reseated both wires onto the switch lugs. It now responds to the programming switch as it's supposed to.
Worth checking for if your shade doesn't respond into programming mode when you push the little switch.
Jim
It seems the tiny spade connections on the momentary programming switch lugs were either loose or off completely. I cut away the heat shrink tubing that covers the wiring into the switch and recrimped and reseated both wires onto the switch lugs. It now responds to the programming switch as it's supposed to.
Worth checking for if your shade doesn't respond into programming mode when you push the little switch.
Jim
