Awning lights

Greg C.

Senior Member
Joined
May 6, 2017
Messages
131
Location
Indiana
I have a '17 38RL. It has two awnings, one on the dining room slide, the other a long slide that goes from the entrance door to the front of the trailer. My problem is both slides have LED strips and they are wired together on the same switch. The lights on the dining room slide quit working and upon inspection I found a wire that was broken and after rewiring it I now have no lights working at all. I can't figure out how they are wired together so if anyone out there has had any experience with this problem let me know.
 
awning lights

I have a '17 38RL. It has two awnings, one on the dining room slide, the other a long slide that goes from the entrance door to the front of the trailer. My problem is both slides have LED strips and they are wired together on the same switch. The lights on the dining room slide quit working and upon inspection I found a wire that was broken and after rewiring it I now have no lights working at all. I can't figure out how they are wired together so if anyone out there has had any experience with this problem let me know.

Make sure you have the correct polarity at your splice, LED lights are polarity sensitive.
 

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top