My 2015 Crosscroads Cruiser has damaged plastic molding that covers the slides floor ends when extended. Trying to find replacements without success. Any suggestions? It’s black plastic L shaped about 1/2” x 2.5” x the length of the slide.
Not sure what about your "L Molding" but look up slide skis. They go on the bottom/side of the slide and run the length of the slide. That may be what you have.
See if this is what you need:
https://www.trekwood.com/products/1507630/Trim-Slideout-Floor-Strip-31-1-2-x-1-1-4-x-2-3-8-ABS-Black
You trim it to the length you need.
I replaced all mine with thin stainless steel. Took a sheet, cut it as needed and formed it into the L shape.