LCI Leveling System Error Codes

[LadyFireCaptain]

Can anyone tell me how to remove an error code ? It says “return for service” “ERROR retract timed out”. We had a bad camp spot that we did our best to level and finally got it to level. When we went to retract it wouldn’t do anything. We found that the 100 amp breaker was kicked. We moved to a better spot and it leveled normally and retracted normally. We came part way home and dropped the rig off at a repair shop to replace a step motor but I forgot to turn the power off. I realized the next day and called the shop and he turned it off. When he went to move it the code came up. He didn’t do anything with the leveling. All pads are fully retracted so we got it Home and I have done everything I could think of. None of the commands do anything so I can’t lower the pads part way. Any ideas?

 

[Bnbl]

From the LCI troubleshooting chart


1. Parking Brake not engaged:
Press Enter and Retract. Engage parking brake.

2. Engine is not running prior to starting auto retract sequence:
Press Enter and Retract at the same time to clear error.
Turn engine on and restart auto retract sequence.

3. Leaking hose or fitting:
Check for leaks, repair if necessary.
Press enter and retract to clear error.