Recessed lights

[ForestQueen]

I have a 2015 cruiser cf305rs. I have gone through the manual and looked elsewhere to try to figure out how to replace the recessed lights with updated LED lights, but I can't figure out if they are clip in lights or another type. They have no visible screws and I don't want to try to pry the lights out and risk damage to the light or ceiling. Any advice?

 

[DavisK]

The puck lights in my Rockwood look similar to those, but don't have a frame around them. To remove the lens on them, I just give it a counter-clockwise twist.

 

[bogart661]

Those are the same LED lights that came with our 5th wheel. You need to remove the lens by placing a small screw driver between the lens and the frame and give it a twist, After the lens is removed there are 3 screws holding the fixture in place.
I have replaced most of ours as the LED boards have gone bad.