ST320BH Slide Seals falling off

[Spasm]

Hello,

My slide seals are falling off and I can't figure out how to get them back on. They are the seals that run along the exterior of the trailer (not the slide) and function when the slide is closed. They look like they should slide on and remain in place but they keep falling off. I've attached a picture. It shows it coming loose and it will fall off the entire length of the seal. Any ideas?

 

[BPHusker]

That happens to me as well. I find you can snap them back into place. Hook one side in the groove and, with your thumb snap the other side into place.

 

[Jimmerz]

Mine also. I used to be able snap them in but now that's not working so well. I think I need silicone?

Sent from my XT1585 using Tapatalk

 

[Lloyd S]

Can you put a screw thru it on the top end?

 

[Travelin' Texans]

You'll need some type of weather strip adhesive, I think you'll find silicone won't stick to those seals.

 

[sjk1998]

My seals were doing the same thing on our unit. I did what Travelin Texans did, I dabbed some 3M weather strip adhesive in a few spots on the track the put the seal back onto the track and haven't had a problem since.

 

[CFUN]

I looked at mine this morning, and there are three screws (top, bottom and mid point) that must have been installed at the factory to hold the seal on.