tv swap

[duallydan]

I have a 2000 four winds 31N. I would like to swap out the analog tv with a digital. I have removed all the screws from the trim and lower bracket but the tv will still not come out. Anyone done this yet and possibly found a hidden mount somewhere. Any ideas would be appreciated. Thanks

 

[asquared]

sorry I can't help but wanted to say welcome to the forum!

 

[Lloyd S]

Dan, Welcome aboard from one Wisconsinite to another!
If you have all the trim off from the face of it and the screws out that are visible and it still won't move, try looking from the bottom. My guess is there is anchors underneath. Good luck. Let me know how you make out with it.

 

[duallydan]

Thanks Lloyd. Ill have to remove the full width slide out drawer underneath first but i'll give it a try.

 

[defrue]

I have a 2003 Four Winds 31Z. I removed the RCA Analog TV from the cab-over right after I got it home. After removing the side trim, I found a 1" strap that connected the back of the TV to the ceiling of the cab-over. There was no way to reach it to get it disconnected, so I ended up taking a 1x2" and taping a knife to the end of the board. The board was just narrow enough to fit through the opening. Then with one quick cut, I cut the strap, then literally caught the TV as it plummeted forwarded (not an easy task with one hand...the other hand had the stick). Hope this helps!

 

[scouser]

have a look on irv2 they had a step by step guide on how to remove the tv
mine was on a winch that you lowerd the tv with after you removed the front and bottom piece
Dave