When we ordered our 36FB, I ordered two heat pumps instead
of just one� Two ACs / twice the cooling capacity !!! Two heat pumps, twice the
heating capacity </span>??? </span>The delivered 36FB did indeed come with two ‘heat
pump’ air conditioners, and two thermostats.
</span>One thermostat provided for: ‘cool’, ‘gas heat’, and ‘electric heat’. </span>The other just provided for ‘cool’ and ‘heat’. </span>I never did fully understand how two
different thermostats with ‘heat’/’gas heat’ settings could </span>possibly ‘control’ one single gas furnace???
In practice the ‘electric heat’ is pretty cool! </span>In really cold weather it kicks in the gas
furnace to get the process started then takes over with electric heat. </span>Then if ‘electric heat’ can’t keep up with
the cold weather� then it starts-up the gas furnace again (even with ‘electric
heat’ selected on the thermostat).
</span>Pretty impressive!
BUT </span>my second ‘heat
pump’ sits idle� even with the temperature set to 85 on the ‘cool’/’heat’
thermostat (with outside temperatures in the 30’s).
SO� I’m thinking my second ‘heat pump’ is pretty useless as
a heat source. </span>It does ‘cool’ things
down half way decently, but nowhere </span>near
as efficiently as a refrigerated air unit (without the heat pump option) would
have worked ???
Then to make matters worse�
</span>The ‘heat pump’ that ran almost all night long, until it turned-over
control to the gas furnace, was all iced-up in the morning. </span>Guess when it is in the 30s outside� I should
go with gas heat, instead of trying to save a buck by using ‘heat pump’
electric heat.
Do I assume correctly that a second ‘heat pump’ was probably
a bad investment, AND when the outside temperatures are in the 30’s� use the
gas furnace and not the heat pumps as a heat source???
of just one� Two ACs / twice the cooling capacity !!! Two heat pumps, twice the
heating capacity </span>??? </span>The delivered 36FB did indeed come with two ‘heat
pump’ air conditioners, and two thermostats.
</span>One thermostat provided for: ‘cool’, ‘gas heat’, and ‘electric heat’. </span>The other just provided for ‘cool’ and ‘heat’. </span>I never did fully understand how two
different thermostats with ‘heat’/’gas heat’ settings could </span>possibly ‘control’ one single gas furnace???
In practice the ‘electric heat’ is pretty cool! </span>In really cold weather it kicks in the gas
furnace to get the process started then takes over with electric heat. </span>Then if ‘electric heat’ can’t keep up with
the cold weather� then it starts-up the gas furnace again (even with ‘electric
heat’ selected on the thermostat).
</span>Pretty impressive!
BUT </span>my second ‘heat
pump’ sits idle� even with the temperature set to 85 on the ‘cool’/’heat’
thermostat (with outside temperatures in the 30’s).
SO� I’m thinking my second ‘heat pump’ is pretty useless as
a heat source. </span>It does ‘cool’ things
down half way decently, but nowhere </span>near
as efficiently as a refrigerated air unit (without the heat pump option) would
have worked ???
Then to make matters worse�
</span>The ‘heat pump’ that ran almost all night long, until it turned-over
control to the gas furnace, was all iced-up in the morning. </span>Guess when it is in the 30s outside� I should
go with gas heat, instead of trying to save a buck by using ‘heat pump’
electric heat.
Do I assume correctly that a second ‘heat pump’ was probably
a bad investment, AND when the outside temperatures are in the 30’s� use the
gas furnace and not the heat pumps as a heat source???