Omni sv34 Furnace Issue

[Ivanp]

Trouble with our furnace will not start any have this issue
No help from anyone 2022 model

[16ACE27]

Originally Posted by Ivanp

Trouble with our furnace will not start any have this issue
No help from anyone 2022 model

Did you search the forum for "furnace"?

You'll see lotsa people have furnace issues and learn about troubleshooting.

Who is this "anyone" that has provided no help?

[Jimbo56]

Not enough info. A 2022 model? Which model? What brand of furnace? Did it ever work during PDI? Or on other trips? And yes, use the search function.

[Grumpy Grampa]

1. Thermostat work, will AC start?
2. Propane tank on and has propane?
3. You getting the clicking noise when trying to start.?

[Ivanp]

AC works fine. Thermostat ok
Propane in tank tank is on or open
No noise from furnace area no clicking sound
Furnace has worked before seams to only work when it wants too
Now will not start at all

[EA37TS]

Originally Posted by Jimbo56

Not enough info. A 2022 model? Which model? What brand of furnace? Did it ever work during PDI? Or on other trips? And yes, use the search function.

Thread title Omni SV34

[Grumpy Grampa]

If it works occasionally, it might be a defective thermostat, on the heat side.

[OldWEB]

Originally Posted by Ivanp

AC works fine. Thermostat ok
Propane in tank tank is on or open
No noise from furnace area no clicking sound
Furnace has worked before seams to only work when it wants too
Now will not start at all

Does your model allow access from outside? If so, open that and there you would find the make and model number. Also see if there is a blinking red light, take notice of the flashes. May be a power switch/fuse for the unit that you then can cycle off/on.

[Ivanp]

Thanks to those who responded. I have tried many things after talking to some RV mechanics. Nothing has worked. No blinking lights. My real issue is with Thor they have provided NO help. No Help! ( call a mobile mechanic to come look at it. Good luck with that!)

[16ACE27]

Originally Posted by Ivanp

Thanks to those who responded. I have tried many things after talking to some RV mechanics. Nothing has worked. No blinking lights. My real issue is with Thor they have provided NO help. No Help! ( call a mobile mechanic to come look at it. Good luck with that!)

What help did you expect from Thor? Did you expect them to diagnose and repair the problem over the phone with no ability to see and troubleshoot it?

Did you call Atwood, the manufacturer of the furnace, for help? Have you taken it to a shop for diagnosis? Had a mobile mechanic look at it?

If it's not the simple stuff like propane and 12 VDC it has to be a more complicated issue and needs to have hands on by a knowledgeable person.

[MJC62]

Maybe control board got wet?
On another thread someone dried out the board with hairdryer and brought furnace back to life.

[16ACE27]

Originally Posted by MJC62

Maybe control board got wet?
On another thread someone dried out the board with hairdryer and brought furnace back to life.

He would have see that is a common problem if he had searched the Forum as recommended in post #2. But thanks for the spoon fed information.

[OldWEB]

Originally Posted by Ivanp

Thanks to those who responded. I have tried many things after talking to some RV mechanics. Nothing has worked. No blinking lights. My real issue is with Thor they have provided NO help. No Help! ( call a mobile mechanic to come look at it. Good luck with that!)

This is a part of the forum to help people, not the "Kiss and Cry" section you see at figure skating competitions... (my son used to figure skate )
So you help us to help you please.

[Jimbo56]

Originally Posted by EA37TS

Thread title Omni SV34

Model of furnace!

[Jimbo56]

I would write down the brand of furnace. Model number. And serial number and call the manufacturers customer assistance line. Not knowing the brand and model of the furnace just makes this guesswork.

[Hittntherooad]

Here is a great trouble shooting video

https://www.youtube.com/watch?v=0t8vRuGdZLw

[MJC62]

Wonder if any progress on the furnace?