Quote:
Originally Posted by 2010Thor21RB
I actually lucked out with moving the Furnace wires from the bed/bath wall to the bed/fridge wall. I just pulled up the bed floorboard and accessed the wires from the back right corner and extended them around the beds hollow space. The big issue now is getting the heat strip to work with everything else. One thing I thought about is the a/c control box has a "W" terminal and it does go to the "W" on the old thermostat and the old thermostat wouldn't do anything with heat until I moved the temp slider above 75 degrees and it would click and run the fan. I wonder since the control box has the plug for the heat strip if it justs gets the signal from the T-stat through the "W" terminal and if thats the case I would just tie the "W" wires from the furnace and the a/c and terminate them on the "W" on the T-stat. Just thinking out loud, not sure if it would work.
|
Here is what I am thinking wiring wise. Let me know if I'm off the mark.
Thor Forums
