Showing Profile Comments 1 to 1 of 1
-
After many conversations with Thor, my RV electrician figured it out. The power relay that actuates when you turn on power has a delay circuit that somehow causes issues with Hall Power and it triggers the 9 blinking lights. My electrician after spending hours changing slid motors, computers and continuity checks narrowed it down to the relay. He disconnected the power wire to the slides at the fuse panel, installed an inline fuse and attached the slide power wire to the output side of the relay bypassing the timer circuit. I no longer get the 9 blinking lights on my bed slide or wall slide. I discussed this with Thor and all they could say was change the timer board that is attached to the relay. Since my electrician installed an inline fuse in the power line I have enjoyed trouble free operation for the last 12,000 miles.