Quote:
Originally Posted by DonKarstedt
This sounded like a great "cheap handling fix" for an AC so I decided to go "all in", yank the thermistor out of the fins, and let it dangle.
No difference.
When blowing fan, output temp is 80 deg, and it will drop to 60 deg. within 1 minute when cooling is engaged. I get the same readings whether the thermistor is installed in the fins or not.
My AC is an "Advent" which I got from Etrailers.com to replace my Coleman. Is it possible that the Advent thermistor functions differently on this brand?
|
I got the same results, I don't "THINK" the probe will do anything when it's over 100 degrees out side...I did get 47 deg. coming out after the unit ran all night , I did cycle off and was off when I got up this morning,,so I lowered the stat to 65... that's when I seen the 47 deg..