|
I just noticed some bolt-down bike fork mounts, usually flat mounted in a truck bed, for removing the bike's front wheel and locking down the fork. If I through-bolted these up high (I could access them from the ladder), the bikes would hang straight down, and could be further stabilized by a strap mount at or near the (concealed) bumper. This should eliminate the cantilever issue raised by Ducksface, and the bikes could be further stabilized from right/left movement by a stabilizing line from the ladder. And the front wheels could be placed inside the coach, further lightening the suspended weight. Any thoughts? Thanks.
__________________
|
Thor Forums
