Quote:
Originally Posted by Paul0138
I'm wondering if the rubber seal on the bottom is supposed to cover the opening all the way to the end. Mine stops about 1.5 inches short on both ends of the bottom of the slide. This opening would be exposed to blowing rain if the slide was opened (or not closed tightly). It leads to the inside of the coach.
|
No, the bulb seal seals should meet and be held in place with a dab of calk. The seals do shrink about 5% over time, so they should be compressed when installing to allow for the shrinkage. Replacement seals are available from RecPro.
Thor Forums
