Quote:
Originally Posted by taylorbob1
You misunderstood me...
The Solenoid inside the Use/Store connection port is bad
So I connected both of the cables together on one side of the solenoid (which renders the solenoid useless)
And by doing so, it’s like not having a Use/Store switch.
All internal functions of my rig now work normally
So now I need to replace the solenoid mechanism & re-wire properly so that the Use/Store switch functions as it’s suppose to
My rig is always plugged-in or solar powered so I rarely have need for the Use/Store switch
It looks something like this...
|
Yes, that bypass will work fine until you get the latching solenoid replaced. And for future reference, the 100 amp DC breaker powers the generator start and hydraulic leveling pump. It is the 50 (or 70 in some coaches) amp DC breaker that goes to the latching relay.