Quote:
Originally Posted by m1noel
Hi Kona Tom,
You didn't mention which dish you had installed. If it is one of the round plastic covered dishes or the Traveler type. The round covered dishes can only receive signal from one satellite at a time. They may allow 2 channels if they happen to be on the same satellite. The Traveler type will receive signals from all the satellites at the same time, but each Wally has to be wired to the dish individually. If only one coax is connected to the dish and split later in the wiring you will only get on channel.
Hope this helps,
Mike
|
Thanks Mike, it’s a Winegard HD Dish. It’s not a round dome dish. We generally get three good satellites that register. I have two separate coax cables, one connected to each Wally. I think it’s a wiring issue, but probably need a diagram.