Scrub
When I originally checked the pins on the use/store switch there was no power to any of the pins except the center ones that I mentioned. I never rechecked after I replaced the fuse because the relay was still not working. I just checked the switch again. Both Red pins have 12 volts and both white pins show continuity to ground. Still no relay clicking. I put a piece of tape on the switch to hold it in store position for a few seconds while I gently massaged the disconnect relay with a rubber mallet. removed the tape and actuated the switch in both positions and got a relay click every time, But not as loud as I thought it should be. Both with the switch in the store and the use position I still get 12 volts to the coach power panel. It doesn't appear that the relay is actually disconnecting the batteries from the coach.
Actually a double click when operating the switch. click when I press the switch and click again when I release the switch
__________________
|