Quote:
Originally Posted by Cummins12V98
It was just a loose fitting, I tightened it and all is well now.
|
I had my second leak on my Second "KantLeak" at the same. The second leak started about 8 months and 4,000 miles after the First "KantLeak KantFix" valve assembly was replaced. The first leak occurred on the right of the plastic TEE to the Hot Water Heater By-pass valve.
Now I have a piece of cardboard laying below the valve assembly to be checked often for leaks (wet cardboard).
Clay 2016 MS 38PS3
Thor Forums
