Quote:
Originally Posted by WRWGN
you must relieve water pressure from the valve before rotating the level. He said turn water supply off, open the sprayer hose to drain and then go inside nd open one of the faucets. Then the switch can be changed. Failure to do so causes the O-Rings to move out of place.
|
In a conversation with Anderson I was told you do not have to relieve the pressure to turn the valve. It should cause the o-rings to fail.
In a conversation with the distributer for all Anderson products I was told you do not have to relieve the pressure to turn the valve. It should cause the o-rings to fail.
(RNO Distributors
https://www.rnodistributors.com/)