Quote:
Originally Posted by Mr Sunshine
Since your problem is valves that are hard to pull, here's the quick cure:
This cure involves drilling a small hole into the valve, with the tanks empty, squirting silicone inside, then capping the hole with a screw. The video is a minute and a half, the job won't take a lot longer!
|
Given the orientation of the valves in the 24.1's sewer compartment there is no way you'll fit a cordless drill in there to drill a hole on the top of the valves. You'll likely need a 90 degree adapter and the job will take more than you think with all the cussing involved LOL.