Quote:
Originally Posted by MS60ocb
I admire your Heat Duct running up behind your water filter. My Heat Duct gets crushed between between the Black Tanl and Brake activator. My activator sets on the edge of the plywood. It is real handy there, but some day I hope to move it back about a foot.
Regarding the water at Elkhart, didn't have a problem but I haven't checked my filter.
Clay 2016 MS 38PS3/Dallas #8120
|
When you consider moving the activator look at the transfer switch, that’s usually pushed all the way back so that there is a proper obstruction for the 6” flex duct for the floor registers.
If the duct isn’t crushed halfway somebody screwed up.
And there should be enough wire to move those two outlets to the opposite side and out of the filter splash zone.